8 Amp Intelligent Battery Charger By Wagan Tech

Our Intelligent Chargers feature internal circuitry which detects the battery type, current battery charge, overall battery condition, and automatically responds to optimize charging!

• 8 Amp Intelligent Battery Charger
• For Battery Types: Lithium Iron-Phosphate (LiFePo4), LPF, SLA, AGM, Maintenance Free, Flooded, Wet Cell, VRLA, Gel, Lead-Acid, Vented, Deep Cycle
• Microprocessor Controlled
• Input Voltage: 110-140V AC
• Output Voltage: 12V
• Output Current: 8A (High) 2A (low)
• AC Cord Length: 6ft
• DC Cord Length: 6ft
• Protections: Short Circuit, Reverse Polarity, Over Charge, Over Heat
• 6-Stage Charging:
• Soft Start: A Slow Charge Current Is Applied That Slowly Ramps Up To Protect The Battery And Optimize Charging
• Bulk Charging: The Charger Identifies The Battery And Its Needs Then Applies A High Voltage/Amperage Charge To Do The Bulk Of The Charging
• Absorption Charging: When The Battery Reaches 80% Capacity The Input Current Begins To Lower, Also Known As The Cooldown Period
• Evaluation Diagnostic: The Last Diagnostic To Ensure The Battery Is At Optimal Health
• Reconditioning Cycle: Prepares Battery For Bulk Charging And Finalizes The Recovery Charge
• Maintenance Charge: When The Battery Reaches 95% The Charger Will Continue To Apply A Steady Current Up To 100% And Continue To Monitor The Battery And Apply A Charge If It Detects Any Loss
• Operating Temperature: 32°F - 104°F (0°C - 40°C)
• Storage Temperature: -4°F - 158°F (-20°C - 70°C)
• Unit Size: 8.0" x 7.0" x 4.0"
• Weight: 2.4lbs
• Certifications: CE, BC
• Sold Individually
• Quality Made Product

If you should need additional Truck Parts and Accessories, please don't hesitate to call our toll-free number 1-888-888-7990